*****ALL ORDERS OVER $200 QUALIFY FOR FREE EXPRESS SHIPPING AUSTRALIA WIDE*****

ProVari v2.5 IN STOCK

If you can order it, we have it here ready to go...

Vapebar, the home of Same Day Shipping...

Should you have any queries, concerns or hesitations please feel free to Contact Us

This is the device that you have been hearing about.

Made in the US, tried, proven and trusted.

This is the variable voltage device that all others strive to be.

On/Off Mode

You can put the ProVari in standby mode so it will not turn on the atomiser when the button is pressed.
This safety feature prevents the atomiser from turning on while it's in your pocket or bag and it prevents any settings from getting changed without you knowing.

16 Second Cutoff
If the button is held down for 16 seconds or longer, the ProVari will shut itself off until the button is released.
If you forget to turn it off before storing it in your pocket or bag, this protects you and prevents the device from activating.

Short Circuit/Atomiser Protection
This protects the ProVari against shorted atomisers/cartomisers.

If this error occurs the ProVari will alert you by displaying E1 on the digital display.
Fix: Remove the atomiser or cartomiser and replace with a different one.

Reverse Battery Protection
Protects against reverse battery installation.

Battery Monitoring/Over-Discharge Protection
The ProVari monitors the battery voltage and will automatically turn off when the battery is discharged.

Amperage Limiting to 3.5 amps
The ProVari will monitor and shut itself off if it detects any excessive over-current conditions.

If this error occurs the ProVari will alert you by displaying E2 on the digital display.
Fix: Lower your voltage setting.

Thermal Monitoring
Shuts the device off if it detects a high temperature condition.
Once the device cools off, it will resume normal operation.

If this error occurs the ProVari will alert you by displaying E3 on the digital display.
Fix: Let the device cool off for several minutes before using again.
(This is a very rare event and something you will most likely never see.)

The ProVari Base Model Includes:

• 1 x ProVari variable voltage electronic vaporiser (In your chosen colour)
• 510 Atomiser Connection

***This item does not include Atomiser, Batteries or Charger***
During checkout you have the option to purchase these items, further options offered on this page have more detail below.

Features:

• Microprocessor controlled
• 2.9-6.0 variable voltage range with .1 volt increments
• Built-in digital display
• AccuSet™ Technology - Self-Calibration Feature
• Atomiser Ohm's checker built-in
• Battery voltage checker built-in
• Translucent light-up pushbutton with low battery indicator
• Single battery design
• Stock 510 connection

• Classy looking and made of stainless steel
• 16 second safety cutoff
• Short circuit protection
• Reverse battery protection
• Thermal monitoring system
• Amperage limiting
• Battery monitor and over-discharge protection
• Laser etched logo
• Vented for added safety
• Proudly made in the USA
• 1 Year warranty with optional 2 year warranty
• Measures - 4.1" L X .90" Dia.(without atomiser)
• Weight - 4.2 ounces (without battery)

Details:

The ProVari is a microprocessor controlled electronic cigarette that lets you adjust the voltage in seconds with just a few button presses. Now you can dial-in the perfect settings for your atomiser, cartomiser and e-liquid. The ProVari has a regulated output which keeps the voltage the same with each puff regardless of your remaining battery power. As the battery drains the device will keep the voltage consistent giving you the perfect vapour all day long.

The ProVari can be adjusted from 2.9 - 6.0 volts in .1 volt increments.

The ProVari is designed to work with the AW IMR high drain batteries that are an optional extra for purchase at checkout.

With its built-in two digit display, you can dial in the perfect voltage and change modes right on the device without any additional hardware. You can visually adjust your voltage and access additional user functions on the device in seconds. It's quick and easy!

Options Available

Provari Extended End Cap - 18650 Battery

The ProVari optional 18650 extension cap replaces the stock end cap and allows you to use a single 18650 battery.

This will extend the length of the device and offer you longer run times between charging.

1/2" Length
Stainless Steel

ProVari Extended Warranty (Optional)

The optional 1 year extended warranty will provide you with two years of factory warranty.

It covers all of the electronics inside the ProVari for a total of two (2) years. (1 year factory warranty + 1 year extended)

The warranty is valid from the date of purchase by the original end-use purchaser. This extended warranty is non transferable and MUST be purchased at the time you purchase your device. (You cannot add the extended warranty at a later time.)

What is not covered:

This warranty does not cover the atomiser, batteries, charger, tips or any other accessories, only the device itself. The warranty does not cover improper or unreasonable use; failure to follow operating instructions; accidents, excess moisture, lightning, power surges, connections to improper voltage supply/batteries, unauthorised alteration or modification of original condition; loss of or damage to the vaporiser or its internal components. Cross threading the end caps is not covered and damage to the finish is not covered.

The cost of shipping the device to us is not covered under the warranty. It is recommended that you return the device to Vapebar who will ship it to Provape for warranty assessment and/or repair (where warranted). On completion of repair, Provape will return ship to your address in Australia.

What we will do:

During the warranty period, we will repair or replace free of charge, any defective parts within a reasonable period of time.

Recommended AW IMR Batteries (Optional)

The standard ProVari takes a single 18490/18500 battery (or 18650 if using optional end cap)

The ProVari uses a special boost circuit to adjust the voltage to your desired level and it only needs a single battery to operate. Single battery devices are the safest electronic cigarettes you can own!

We recommend only using AW IMR high drain batteries in your ProVariYou must use batteries that have a positive nipple on the top. Flat top batteries will not work.

Tip:

We only recommend using approved 18490 & 18650 Batteries in the ProVari. All of the batteries that we sell on our website have been tested to work with the ProVari and these are the only cells that you should use. There is a big difference between all the different batteries on the market and a lot of testing has been done on these various batteries. 

The reason we recommend using high drain cells is because these cells can output more current providing the ProVari with the power it needs to operate optimally. There are a number of batteries that will cause issues including Trustfire, Ultrafire and other brands. These batteries can not handle higher current output and the battery will turn off while in use of cause a low battery alert much sooner than it should because the batteries have a high internal resistance.

Please make sure you get the proper batteries to use in the ProVari to avoid problems.

For more Battery Info - Check out this article on our Vape-Blog

Be Battery Aware - Be Battery Safe

High Performance Charger for Li-ion Batteries

This high performance li-ion rapid charger is a nice upgrade to the standard li-ion chargers.

Includes 4 bays:

The top 2 bays can charge the following size batteries - 10440, 14250, 14430, 16340.

The bottom 2 bays can charge the following size batteries - 17500, 17650, 17670, 18490/18500, 18650, 18670

All four bays can charge at once so you can mix and match different batteries.

4 indicator lights alert you when the battery is charging or fully charged. Also alerts you when the battery is 90% complete.


Includes charger, AUS 240v power cable and bonus car charger adapter.
This charger will also work with the High Drain AW 18490 and 18650 batteries used in the ProVari.

This charger has been certified and meets all required Australian standards.

C-Tick Approved Device